中文 
Conductors :
Class 1 or Class 2 of plain or metal-coated annealed copper or
plain aluminium or aluminium alloy,
or of Class 5 of plain or metal-coated coppe
Insulation : XLPE material
Applications:
These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.
Armour:
Aluminum/galvanized steel/steel wires applied helically over the Inner Covering as per IEC 60502-1, or double aluminum/steel tapes and copper/tinned copper wire can also be manufactured upon request.
Outer Sheath:
Outer sheath shall be of extruded PVC Type ST1/ST2 as per IEC 60502-1, Polyethylene type ST3/ST7, Halogen free compound ST8, Polychloroprene, chlorosulfonated polyethylene or similar polymers, type SE1 are also available on request.
Fire Performance of Cable Sheaths:
Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, Halogen Free material comply to IEC60754-1/2 and IEC 60684-2.
| Single core(unarmoured) | ||||
| Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal Sheath Thickness | Overall Diameter (Approx.) |
| mm^2 | mm | mm | mm | mm |
| 1x1.5 | 1.4 | 0.7 | 1.4 | 5.6 |
| 1x2.5 | 1.8 | 0.7 | 1.4 | 6 |
| 1x4 | 2.3 | 0.7 | 1.4 | 6.5 |
| 1x6 | 2.8 | 0.7 | 1.4 | 7 |
| 1x10 | 3.6 | 0.7 | 1.4 | 7.8 |
| 1x16 | 4.5 | 0.7 | 1.4 | 8.7 |
| 1x25 | 5.6 | 0.9 | 1.4 | 10.2 |
| 1x35 | 6.7 | 0.9 | 1.4 | 11.3 |
| 1x50 | 8 | 1 | 1.4 | 12.8 |
| 1x70 | 9.4 | 1.1 | 1.4 | 14.4 |
| 1x95 | 11 | 1.1 | 1.5 | 16.1 |
| 1x120 | 12.4 | 1.2 | 1.5 | 17.8 |
| 1x150 | 13.8 | 1.4 | 1.6 | 19.8 |
| 1x185 | 15.3 | 1.6 | 1.6 | 21.8 |
| 1x240 | 17.5 | 1.7 | 1.7 | 24.4 |
| 1x300 | 19.5 | 1.8 | 1.8 | 26.7 |
| 1x400 | 22.6 | 2 | 1.9 | 30.5 |
| 1x500 | 25.2 | 2.2 | 2 | 33.7 |
| 1x630 | 28.3 | 2.4 | 2.2 | 37.4 |
| 1x800 | 31.9 | 2.6 | 2.3 | 41.7 |
| 1x1000 | 35.7 | 2.8 | 2.4 | 46.2 |
| Two cores(unarmoured) | ||||
| Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal Sheath Thickness | Overall Diameter (Approx.) |
| mm^2 | mm | mm | mm | mm |
| 2x1.5 | 1.4 | 0.7 | 1.8 | 9.2 |
| 2x2.5 | 1.8 | 0.7 | 1.8 | 10 |
| 2x4 | 2.3 | 0.7 | 1.8 | 11 |
| 2x6 | 2.8 | 0.7 | 1.8 | 12 |
| 2x10 | 3.6 | 0.7 | 1.8 | 13.6 |
| 2x16 | 4.5 | 0.7 | 1.8 | 15.4 |
| 2x25 | 5.6 | 0.9 | 1.8 | 18.4 |
| 2x35 | 6.7 | 0.9 | 1.8 | 20.6 |
| 2x50 | 8 | 1 | 1.8 | 23.6 |
| 2x70 | 9.4 | 1.1 | 1.8 | 26.8 |
| 2x95 | 11 | 1.1 | 1.9 | 30.2 |
| 2x120 | 12.4 | 1.2 | 2 | 33.7 |
| 2x150 | 13.8 | 1.4 | 2.2 | 37.5 |
| 2x185 | 15.3 | 1.6 | 2.3 | 41.6 |
| 2x240 | 17.5 | 1.7 | 2.5 | 46.7 |
| 2x300 | 19.5 | 1.8 | 2.6 | 51.4 |
| 2x400 | 22.6 | 2 | 2.9 | 58.9 |
| Three cores(unarmoured) | ||||
| Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal Sheath Thickness | Overall Diameter (Approx.) |
| mm^2 | mm | mm | mm | mm |
| 3x1.5 | 1.4 | 0.7 | 1.8 | 9.6 |
| 3x2.5 | 1.8 | 0.7 | 1.8 | 10.5 |
| 3x4 | 2.3 | 0.7 | 1.8 | 11.6 |
| 3x6 | 2.8 | 0.7 | 1.8 | 12.6 |
| 3x10 | 3.6 | 0.7 | 1.8 | 14.4 |
| 3x16 | 4.5 | 0.7 | 1.8 | 16.3 |
| 3x25 | 5.6 | 0.9 | 1.8 | 19.5 |
| 3x35 | 6.7 | 0.9 | 1.8 | 21.9 |
| 3x50 | 8 | 1 | 1.8 | 25.1 |
| 3x70 | 9.4 | 1.1 | 1.9 | 28.7 |
| 3x95 | 11 | 1.1 | 2 | 32.4 |
| 3x120 | 12.4 | 1.2 | 2.1 | 36.1 |
| 3x150 | 13.8 | 1.4 | 2.3 | 40.3 |
| 3x185 | 15.3 | 1.6 | 2.4 | 44.6 |
| 3x240 | 17.5 | 1.7 | 2.6 | 50.2 |
| 3x300 | 19.5 | 1.8 | 2.7 | 55.2 |
| 3x400 | 22.6 | 2 | 3 | 63.3 |
| Three cores+1(unarmoured) | ||||||
| Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal Sheath Thickness | Overall Diameter (Approx.) | ||
| mm^2 | (3)mm | (1)mm | (3)mm | (1)mm | mm | mm |
| 3x 16/10 | 4.5 | 3.6 | 0.7 | 0.7 | 1.8 | 17.5 |
| 3x 25/16 | 5.6 | 4.5 | 0.9 | 0.7 | 1.8 | 21.2 |
| 3x 35/16 | 6.7 | 4.5 | 0.9 | 0.7 | 1.8 | 23.8 |
| 3x 50/25 | 8 | 5.6 | 1 | 0.9 | 1.8 | 27.5 |
| 3x 70/35 | 9.4 | 6.7 | 1.1 | 0.9 | 2 | 31.7 |
| 3x 95/50 | 11 | 8 | 1.1 | 1 | 2.1 | 35.8 |
| 3x120/70 | 12.4 | 9.4 | 1.2 | 1.1 | 2.3 | 39.9 |
| 3x150/70 | 13.8 | 9.4 | 1.4 | 1.1 | 2.4 | 44.6 |
| 3x185/95 | 15.3 | 11 | 1.6 | 1.1 | 2.6 | 49.5 |
| 3x240/120 | 17.5 | 12.4 | 1.7 | 1.2 | 2.8 | 55.7 |
| 3x300/150 | 19.5 | 13.8 | 1.8 | 1.4 | 3 | 61.4 |
| 3x400/185 | 22.6 | 15.3 | 2 | 1.6 | 3.2 | 70.4 |
| Four cores(unarmoured) | ||||
| Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal Sheath Thickness | Overall Diameter (Approx.) |
| mm^2 | mm | mm | mm | mm |
| 4x1.5 | 1.4 | 0.7 | 1.8 | 10.4 |
| 4x2.5 | 1.8 | 0.7 | 1.8 | 11.3 |
| 4x4 | 2.3 | 0.7 | 1.8 | 12.5 |
| 4x6 | 2.8 | 0.7 | 1.8 | 13.7 |
| 4x10 | 3.6 | 0.7 | 1.8 | 15.7 |
| 4x16 | 4.5 | 0.7 | 1.8 | 17.8 |
| 4x25 | 5.6 | 0.9 | 1.8 | 21.5 |
| 4x35 | 6.7 | 0.9 | 1.8 | 24.1 |
| 4x50 | 8 | 1 | 1.8 | 27.8 |
| 4x70 | 9.4 | 1.1 | 2 | 32 |
| 4x95 | 11 | 1.1 | 2.1 | 36.1 |
| 4x120 | 12.4 | 1.2 | 2.3 | 40.2 |
| 4x150 | 13.8 | 1.4 | 2.4 | 44.9 |
| 4x185 | 15.3 | 1.6 | 2.6 | 49.8 |
| 4x240 | 17.5 | 1.7 | 2.8 | 56 |
| 4x300 | 19.5 | 1.8 | 3 | 61.7 |
| 4x400 | 22.6 | 2 | 3.2 | 70.7 |
| Multi-cores(unarmoured) | ||||
| Nominal Cross Section | Diameter of Conductor (Approx.) | Nominal Insulation Thickness | Nominal Sheath Thickness | Overall Diameter (Approx.) |
| mm^2 | mm | mm | mm | mm |
| 5x1.5 | 1.4 | 0.7 | 1.8 | 11.2 |
| 7x1.5 | 1.4 | 0.7 | 1.8 | 12 |
| 10x1.5 | 1.4 | 0.7 | 1.8 | 14.8 |
| 12x1.5 | 1.4 | 0.7 | 1.8 | 15.2 |
| 14x1.5 | 1.4 | 0.7 | 1.8 | 16 |
| 19x1.5 | 1.4 | 0.7 | 1.8 | 17.6 |
| 21x1.5 | 1.4 | 0.7 | 1.8 | 18.4 |
| 24x1.5 | 1.4 | 0.7 | 1.8 | 20.4 |
| 30x1.5 | 1.4 | 0.7 | 1.8 | 21.6 |
| 40x1.5 | 1.4 | 0.7 | 1.8 | 26 |
| 48x1.5 | 1.4 | 0.7 | 1.8 | 26.4 |
| 61x1.5 | 1.4 | 0.7 | 1.9 | 29 |
| 5x2.5 | 1.8 | 0.7 | 1.8 | 12.2 |
| 7x2.5 | 1.8 | 0.7 | 1.8 | 13.2 |
| 10x2.5 | 1.8 | 0.7 | 1.8 | 16.4 |
| 12x2.5 | 1.8 | 0.7 | 1.8 | 16.9 |
| 14x2.5 | 1.8 | 0.7 | 1.8 | 17.7 |
| 19x2.5 | 1.8 | 0.7 | 1.8 | 19.6 |
| 21x2.5 | 1.8 | 0.7 | 1.8 | 20.6 |
| 24x2.5 | 1.8 | 0.7 | 1.8 | 22.8 |
| 30x2.5 | 1.8 | 0.7 | 1.8 | 24.1 |
| 40x2.5 | 1.8 | 0.7 | 1.9 | 29.4 |
| 48x2.5 | 1.8 | 0.7 | 1.9 | 29.9 |
| 61x2.5 | 1.8 | 0.7 | 2 | 32.8 |
