中文 
JBD insulation piercing connectors are applicable for low voltage aerial cables. These conector perfurantes are used to establish T-connections and Joint-connections. Main line is pierced by teeth without being stripped of insulation while tap line should be stripped of insulation before being inserted into the hole. Shear head bolts applied for main line.
Used for branch connection
Main line: insulated aluminium cable
Tap line: bare aluminium cable or bare copper cable
Connector body is made of aluminium alloy with high mechanical strength and ensures stable performance.
Special desigened shear head bolt allows efficient insallation within specific shear-off torque. Constant force ensures teeth pentrate cable without damaging mechanical strength of conductor.
Insulation sheath provides superior waterproof.
Standard: EN 50483-4, NF C 33-020, NF C 33-004
| Type | Main Conductor Size(mm²) | Tap Conductor Size(mm²) | Number of Bolts (Tap) | Shear-off Torque (Nm) | Pack (pcs) |
| JBD16-25/4-25 | 16-25 | 4-25 | 1 | 13 | 20x4 |
| JBD35-70/6-25 | 35-70 | 6-25 | 1 | 16.5 | 20x4 |
| JBD35-95/4-50 | 35-95 | 4-50 | 1 | 16.5 | 20x4 |
| JBD35-95/6-50 | 35-95 | 6-50 | 1 | 16.5 | 20x4 |
| JBD35-70/35-70/2 | 35-70 | 35-70 | 2 | 16.5 | 20x4 |
| JBD35-95/6-50/2 | 35-95 | 6-50 | 2 | 16.5 | 20x4 |
| JBD70-150/4-50/2 | 70-150 | 4-50 | 2 | 16.5 | 15x4 |
