中文 
Tension clamp for the anchoring of 2 or 4 core overhead cables to poles or walls by standard hooks. Tension clamp anchoring clamp dead end is equipped with a spring to make the installation easier.
Applied on cable from 10 to 50 mm² in main / branch / service / end user electrical connections. Tightening installation troque should not be lower than 22 N·m.
ABC cable anchoring clamp metal tension clamp is made of electro galvanized or hot dip galvanized steel, UV resistant, FG reinforced poly-mers, galvanized hardware.
| Productor Code | Cable type | Size(mm²) | Minimum breaking load(KN) | Overhead Line Application |
| PA-215 | 2 core ABC | 10-50 | 2×10mm² 2.5KN | Main connections/End use connections, up to 1 kv |
| 2×16mm² 3.5KN | ||||
| 21×25mm² 5KN | ||||
| 2×35mm² 6KN | ||||
| 2×50mm² 6KN | ||||
| PA-415/PA-415Y | 4 core ABC | 10-50 | 4×10mm² 5KN | Main connections/End use connections, up to 1 kv |
| 4×16mm² 7KN | ||||
| 4×25mm² 10KN | ||||
| 4×35mm² 12KN | ||||
| 4×16mm² 12KN |
