中文 
OPGW Tension Clamp is a combination of clamp, with a suspension head (each head by a rubber clamp suspension, aluminum plates, U-card, bolt, spring cushion, flat pad, nut, pin closed form), outer preformed wire, retaining preformed wire line combination.
OPGW Premored/Helical Tension Clamp is mainly used for installation of cable with less than 160 kN RTS onto tension tower/pole, corner tower/pole, and terminal tower/pole. A complete set of OPGW Premored/Helical Tension Set includes Aluminum Alloy or Aluminum-Clad Steel Dead-end, Structural Reinforcing Rods, Supporting fittings and Grounding wire Clamps etc.
OPGW Single Preformed Tension Clamp
OPGW Extra-Strength Double Preformed Tension Clamp
Specification of OPGW Single Preformed Tension Clamp
| Type | Available Dia.of Cable | RTS of cable (kN) | |
| Min. ( mm) | Max.( mm) | ||
| ONL O60/0880 | 7.6 | 8.8 | 60 |
| ONL 060/1010 | 8.9 | 10.1 | 60 |
| ONL 060/1140 | 10.2 | 11.4 | 60 |
| ONL 060/1270 | 11.5 | 12.7 | 60 |
| ONL 060/1400 | 12.8 | 14 | 60 |
| ONL 060/1530 | 14.1 | 15.3 | 60 |
| ONL 080/0880 | 7.6 | 8.8 | 80 |
| ONL 080/1010 | 8.9 | 10.1 | 80 |
| ONL 080/1140 | 10.2 | 11.4 | 80 |
| ONL O80/1270 | 11.5 | 12.7 | 80 |
| ONL 080/1400 | 12.8 | 14 | 80 |
| ONL O80/1530 | 14.1 | 15.3 | 80 |
| ONL 100/1010 | 8.9 | 10.1 | 100 |
| ONL 100/1140 | 10.2 | 11.4 | 100 |
| ONL 100/1270 | 11.5 | 12.7 | 100 |
| ONL 100/1400 | 12.8 | 14 | 100 |
| ONL 100/1530 | 14.1 | 15.3 | 100 |
| ONL 100/1660 | 15.4 | 16.6 | 100 |
| ONL 120/1140 | 10.2 | 11.4 | 120 |
| ONL 120/1270 | 11.5 | 12.7 | 120 |
| ONL 120/1400 | 12.8 | 14 | 120 |
| ONL 120/1530 | 14.1 | 15.3 | 120 |
| ONL 120/1660 | 15.4 | 16.6 | 120 |
| ONL 120/1790 | 16.7 | 17.9 | 120 |
| ONL 140/1270 | 11.5 | 12.7 | 140 |
| ONL 140/1400 | 12.8 | 14 | 140 |
| ONL140/1530 | 14.1 | 15.3 | 140 |
| ONL 140/1660 | 15.4 | 16.6 | 140 |
| ONL 140/1790 | 16.7 | 17.9 | 140 |
| ONL 140/1920 | 18 | 19.2 | 140 |
| ONL160/1400 | 12.8 | 14 | 160 |
| ONL 160/1530 | 14.1 | 15.3 | 160 |
| ONL 160/1660 | 15.4 | 16.6 | 160 |
| ONL 160/1790 | 16.7 | 17.9 | 160 |
| ONL160/1920 | 18 | 19.2 | 160 |
| ONL 160/2050 | 19.3 | 20.5 | 160 |
The symbols of “ONL” are: O-apply to OPGW cable, N-tension set, L-helical rods. The products are beyond the schedule, if need more please contact our company freely.
OPGW Extra-Strength Double Preformed Tension Clamp
| Type | Available Dia.of Cable | RTS of cable (kN) | |
| Min. (mm) | Max. (mm) | ||
| ONLS 170/1530 | 14.1 | 15.3 | 170 |
| ONLS 170/1660 | 15.4 | 16.6 | 170 |
| ONLS 170/1790 | 16.7 | 17.9 | 170 |
| ONLS 210/1660 | 15.4 | 16.6 | 210 |
| ONLS 210/1790 | 16.7 | 17.9 | 210 |
| ONLS 210/1920 | 18 | 19.2 | 210 |
| ONLS 250/1790 | 16.7 | 17.9 | 250 |
| ONLS 250/1920 | 18 | 19.2 | 250 |
| ONLS 250/2050 | 19.3 | 20.5 | 250 |
| ONLS 320/1920 | 18 | 19.2 | 320 |
| ONLS 320/2050 | 19.3 | 20.5 | 320 |
| ONLS 400/2050 | 19.3 | 20.5 | 400 |
| ONLS 400/2180 | 20.6 | 21.8 | 400 |
The symbols of “ONLS” are: O-apply to OPGW cable, N-tension set, L-helical rods, S-double tension set The products are beyond the schedule, if need more please contact our company freely.
