中文 
ABC cable tension clamp anchoring clamp is for the termination of 4-core LV ABC cable with hook fixing.
The anchoring clamp is designed to anchor insulated service lines with 4 conductors of airdac cable, in LV ABC insulated overhead systems, up to 1 KV.
Applied on cable from 50 to 150 mm² in main electrical connec-tions. Tightening installation troque should not be lower than 35 N·m.
The ABC cable fitting anchoring clamp is made of hot dip galvanized steel, uv resistant, FG reinforced polymers, galvanized hardware, aliminium.
Installation:
The anchor clamps have strong springs which keep the clamp in an open position during the installation of conductors. The clamping action functions through wedges.
| Productor Code | Cable type | Size （mm²） | MBL,KN | Overhead Line |
| PA-455 | 4 core ABC | 50-150 | 4×50mm² 25KN | Main connections, up to 1 kv |
| 4×70mm² 35KN | ||||
| 4×95mm² 35KN | ||||
| 4×120mm² 35KN | ||||
| 4×150mm² 35KN |
